Categories
BLOG

how to make cbd e juice

How to Make Your Own CBD E-Liquid with CBD Crystals

Table of Contents

What are CBD Crystals?

CBD crystals are simply a form in which CBD can be presented. It gets its name from its resemblance to actual crystals, yet the consistency itself is nothing like crystals, and you needn’t worry about them being hard.

There are 3 different types or forms of CBD crystals, and these are CBD Crystal Isolates, CBD Crumble, and CBD Shatter. These are all different due to the method of extraction, and the different types of solvents used to get the CBD from the hemp or cannabis plants.

CBD crystal isolates are white and powdery in consistency, and these are usually around 98 – 99% pure CBD, with the exception of traceable amounts of other components in the cannabis or hemp plants.

CBD shatter is thin and has an appearance like that of glass, for it usually comes in sharp pieces, and will shatter when dropped or hit. CBD wax shatter is usually not clear in colour, for it is not a pure isolate, but it is very clean and is preferred for many different types of DIY CBD products thanks to its malleability.

CBD wax crumble is waxy and smooth in appearance, and as its name suggests, looks like large crumbs or crumbles off a larger piece. This type of CBD crystal gets its appearance from both the way it is extracted and the components it has within it. Normally, wax crumble is more of a full spectrum CBD, meaning that it has many of the natural oils and terpenes which the cannabis or hemp plant produces.

How to Make Your Own E-Liquid with CBD Crystals?

E-liquids are actually very simple and easy to make. Especially when you want to make one just to your liking, or to cover certain preferences or needs of yours.

The best way to start out is by purchasing high-quality food grade Propylene Glycol (PG), and Vegetable Glycerin (VG), both are found easily on Amazon. Then, you need to purchase high-quality CBD Crystals of your choice. Make sure you are getting CBD Crystals that are an Isolate to get the most out of your products and to be able to make a more seamless and smooth e-liquid.

After you purchase your 3 main ingredients, you will also need an airtight container or bottle in which you can mix your e-liquid and store in. This needs to be airtight because you will be warming your mixture up in a pot of warm water, and you don’t want any water whatsoever getting into the mix. Make sure it is heat-safe and airtight.

If you want to make a flavoured E-liquid you will need to purchase a high-quality E-liquid Flavour Concentrate in the flavour of your choice. You can get these on Amazon or from any Vape Shop.

Now, to begin making your own CBD e-liquid you must first know that the most E-liquids have a PG to VG ratio between a 60:40 and 70:30. Meaning it is made up of 60% PG (Propylene Glycol) and 40% VG (Vegetable Glycerin).

Love Hemp suggests 200mg of crystals to 10ml of E-liquid for best results, so based on their professional opinion we suggest the same. This would make an E-liquid with a strength of about 2%.

Right below here you will see the step by step method we find the best:

  1. Measure out 6ml PG and 4ml VG and pour the mixture into your airtight container (This is to make 10ml of E-liquid).
  2. Measure out 200mg of CBD Crystals (this is best done with a scale) and mix into the airtight container.
  3. Pour about 3 – 5 inches of water into a pot and set on medium-high heat. This water should reach approximately 60 degrees Celsius. This is basically very hot, but not boiling. Be sure to not go too far over this temperature.
  4. Once the water is the correct temperature, put your sealed contained of e-liquid into the water, and set your timer for 10 minutes. Note: this is just so that all the ingredients in your e-liquid can fully melt and merge into one another.
  5. After the 10 minutes is up, you can take out your e-liquid, let it cool, and even mix in a few drops of flavouring if you choose to do so. You can also add it in before the mixture goes into the hot water, for it does not change much in terms of the outcome.

Now you know all about how to make your own CBD infused e-liquid. We hope you like the way yours turns out. Making vape juice really is a simple task, and only takes around 15 minutes or so. Many people are starting to make their own because they like the control they have. This is a great way to make a non-addictive E-liquid free of nicotine.

Let us know if you’ve made E-liquids before and how they’ve turned out!

The Ultimate Guide to making your own CBD E-liquid! Discover how to turn your CBD crystals into CBD vape juice and save you money!

How To Make Cannabis E-liquid At Home

Cannabis e-liquids are the stealthiest and fastest way to get stoned. Plus, they taste amazing. Use these instructions to make your own at home! It’s not as difficult as you might think.

Vaping is the new smoking. Okay, some cannabis lovers will always smoke the herb. But some users are ditching tar, carbon monoxide, and carcinogens for a cleaner hit of cannabinoids. Instead of combustion, vaporizers use convection heating, conduction heating, or a combination of both to release cannabinoids and terpenes into an inhalable vapor.

This is easier on the lungs, far more tasty, and a lot more discreet than walking around with a joint. CBD users also appreciate this form of ingestion. Because vaporizing a CBD liquid is much more enjoyable than swallowing a capsule.Vaporizers are available in both desktop and portable models. Vape pens are the stealthiest option and the easiest to carry around. These sleek and futuristic devices can vaporize both herb and extracts, depending on the model. In this article, you’ll learn how to make your own stash of cannabis e-liquid to use with your vape pen.

WHAT IS E-LIQUID?

E-liquid, otherwise known as vape juice, is traditionally a nicotine-containing product. However, cannabis users have put their own spin on things. Both THC and CBD e-liquids (with accompanying terpenes) are available, and feature a base of either propylene glycol (PG) or vegetable glycerin (VG).

PG is a colourless and odourless organic compound. It’s not very viscous, which makes things easier when it comes to refilling cartridges and cleaning your device. VG is a completely natural liquid derived from plant oils. It’s also odourless, yet has a slightly sweet taste. It’s much more viscous than PG. It’s not ideal for cleaning, but it produces thick, satisfying clouds of vapor.

Natural and artificial food-grade flavourings are also typically added to create an array of flavours—anything from candy and mint to fruits. E-liquid is then loaded into the tank of an e-cigarette or vaporizer and heated to anywhere between 90–200°C. Devices will need to be set to around 157°C to effectively evaporate THC, whereas CBD requires slightly higher temperatures of between 160–180°C.

USING E-LIQUIDS IN VAPE PENS

Vape pens represent the pinnacle of portability. These sleek devices feature similar technology to desktop vapes, just condensed into a pocket-friendly design. They share an appearance with standard pens and are therefore easy to store and conceal. Vape pens are composed of two main parts: the cartridge, and the battery. Cheaper, disposable vape pens come with pre-filled cartridges. However, more expensive models allow users to refill cartridges with their own product.

Vape pens are ideal for vaporizing high-potency extracts such as THC-enriched e-liquid or distillate. A single hit can provide just as much THC as an entire joint, with much less effort. There’s no need to carry around a container of buds, rolling papers, and a lighter. Just hit the pen and enjoy the ride.

WHY MAKE YOUR OWN E-LIQUID?

Learning to make your own e-liquid is a worthwhile endeavour. It offers the same level of satisfaction as cooking your own edibles or crafting your own extracts and tinctures. Making e-liquid at home also contributes to peace of mind. You’ll know exactly what you’re inhaling with every hit.

Store-bought e-liquid from unreliable companies can become contaminated in the same way that cannabis flowers can be laden with pesticides. There’s no way to tell exactly what’s inside a formula unless you get it tested at a lab—or simply make it yourself. You’ll also save money if you buy what you need in bulk or grow your own buds.

QUALITY INGREDIENTS ARE ESSENTIAL

Take your time to grow and gather the best supplies you can find. By starting out with the best materials possible, you’ll achieve the best outcome. There’s little point in going through the whole process to produce something substandard. Spend some time identifying the ideal source of VG and the best cannabis flowers you can get your hands on. Even better, you can grow your own. Check out these ten amazing strains with high THC levels and unmatched flavours to start you off on the right foot.

HOW TO MAKE YOUR OWN THC E-LIQUID

Now that you know the benefits of making your own vape juice, let’s get into the nitty-gritty. It’s time to make your own! As with almost anything to do with cannabis, there’s more than one way to skin this cat. Below, we’ll talk you through three of the easiest methods.

ROSIN EXTRACTION

Using rosin to make your own vape juice is the cleanest and quickest method. Rosin, by nature, is a low-risk extract. There are no solvents or harsh chemicals used in the process. It’s simply a matter of applying a bit of heat and pressure to extract the resin. You can use buds to make rosin if you have enough resinous flowers to hand. If not, you can press rosin from concentrates such as BHO wax.

Cannabis e-liquids provide a potent hit of cannabinoids in the form of smooth, clean vapor. Use these methods to easily make your own weed e-liquid at home.